he ESDAUDS03UG4 is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect high speed data interfaces. It has been specifically designed to protect sensitive electronic components which are connected to data and transmission lines from over-stress caused by ESD (Electrostatic Discharge).
- Peak pulse power 32W @ 8/20μs waveform
- Protects two or four I/O lines
- IEC 61000-4-2 (ESD) ±12kV(air), ±12kV(contact)
- IEC 61000-4-5 (Lightning) 4A (8/20μs)
- Low capacitance
- Low leakage current
- 5V operating voltage
- Solid-state silicon avalanche technology
- Device meets MSL 1 requirements
- Halogen free and RoHS compliant
- High Definition Multi-Media Interface (HDMI)
- Digital Visual Interface (DVI)
- USB 1.1/2.0/OTG
- IEEE 1394 Firewire Ports
- Notebooks & Handhelds
- Projection TV & Monitors
- Set-top box
- Flat Panel Displays
- PCI Express
| Type Number | Symbol | Parameter | Conditions | Min | Typ | Max | Unit |
| ESDAUDS03UG4 | IPP | peak pulse current | tp = 8/20 μs | 4 | A | ||
| Tj | junction temperature | -55 | 150 | °C | |||
| VRWM | reverse working voltage | 3.3 | V | ||||
| VBR | reverse breakdown voltage | IT = 1 mA; Any I/O pin to GND | 3.6 | V | |||
| IR | reverse leakage current | VRWM = 3.3 V; Any I/O pin to GND | 1 | μA | |||
| VF | diode forward voltage | IF = 15 mA | 0.85 | 1.2 | V | ||
| VH | holding reverse voltage | 2 | V | ||||
| VC | clamping voltage | IPP = 4 A; tp = 8/20 μs | 8 | V | |||
| Cj | Junction Capacitance | VR = 0 V; f = 1 MHz; Between I/O pins |
0.35 | 0.45 | pF | ||
| VR = 0 V; f = 1 MHz; Any I/O pin to GND |
0.58 | 0.7 | pF |
| Type number | Package | Packing | Product status | Marking | Orderable part number | Ordering code (12NC) |
|---|---|---|---|---|---|---|
| Type number | Ordering code (12NC) | Orderable part number | Region | Distributor | Order sample |
|---|---|---|---|---|---|
| Chemical content | Orderable part number | Type number | RoHS / RHF | Leadfree conversion date | MSL | MSL LF |
|---|---|---|---|---|---|---|
Disclaimer
All information in this document is furnished for exploratory or indicative purposes only. All information in this document is believed to be accurate and reliable. However, WeEn Semiconductors does not give any representations or warranties as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. WeEn Semiconductors may make changes to information published in this document at any time and without notice. Minor deviations may occur in the products from different manufacturing location. This document supersedes and replaces all information supplied prior to the publication hereof. Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.
