An AC Thyristor power switch with very high noise immunity and over-voltage protection configured for negative gate triggering in a SOT96-1 (SO8) small surface-mountable plastic package
- Exclusive negative gate triggering
- Full cycle AC conduction
- High noise immunity
- Remote gate separates the gate driver from the effects of the load current
- Surface-mountable package
- Very sensitive gate for lowest gate trigger current
- Safe clamping of low energy over-voltage transients
- Self-protective turn-on during high energy voltage transients
- Fan motor circuits
- Pump motor circuits
- Lower-power highly inductive, resistive and safety loads
| Type Number | Symbol | Parameter | Conditions | Min | Typ/Nom | Max | Unit |
|---|---|---|---|---|---|---|---|
| ACT102H-600D | VDRM | repetitive peak off-state voltage | 600 | V | |||
| IT(RMS) | RMS on-state current | full sine wave; Tamb ≤ 100 °C | 0.2 | A | |||
| ITSM | non-repetitive peak on-state current | full sine wave; Tj(init) = 25 °C; tp = 16.7 ms | 8.8 | A | |||
| full sine wave; Tj(init) = 25 °C; tp = 20 ms | 8 | A | |||||
| Tj | junction temperature | 125 | °C | ||||
| VPP | peak pulse voltage | Tj ≤ 25 °C; non-repetitive, off-state | 2 | kV | |||
| IGT | gate trigger current | VD = 12 V; IT = 100 mA; LD+ G-; Tj = 25 °C | 0.5 | 5 | mA | ||
| VD = 12 V; IT = 100 mA; LD- G-; Tj = 25 °C | 0.5 | 5 | mA | ||||
| IH | holding current | VD = 12 V; Tj = 25 °C | 20 | mA | |||
| VT | on-state voltage | IT = 0.3 A; Tj = 25 °C | 1.2 | V | |||
| VCL | clamping voltage | ICL = 0.1 mA; tp = 1 ms; Tj ≤ 125 °C | 650 | V | |||
| dVD/dt | rate of rise of off-state voltage | VDM = 402 V; Tj = 125 °C; (VDM = 67% of VDRM); exponential waveform; gate open circuit | 300 | V/µs | |||
| dIcom/dt | rate of change of commutating current | VD = 400 V; Tj = 125 °C; IT(RMS) = 1 A; dVcom/dt = 15 V/µs; gate open circuit | 0.15 | A/ms |
| Type number | Package | Packing | Product status | Marking | Orderable part number | Ordering code (12NC) |
|---|---|---|---|---|---|---|
| ACT102H-600D |  SOT96-1 |
Reel 13" Q1/T1 | Volume production | Standard Marking | ACT102H-600D,118 | 9340 645 54118 |
| Type number | Ordering code (12NC) | Orderable part number | Region | Distributor | Order sample |
|---|---|---|---|---|---|
| ACT102H-600D | 9340 645 54118 | ACT102H-600D,118 | NA | NA |
| Chemical content | Orderable part number | Type number | RoHS / RHF | Leadfree conversion date | MSL | MSL LF |
|---|---|---|---|---|---|---|
| ACT102H-600D | ACT102H-600D,118 | ACT102H-600D |   |
Always Pb-free | 1 | 1 |
Chemical Content - ACT102H-600D
As a proactive and sustainable company, WeEn Semiconductors has decided to publish chemical content information of its product portfolio through direct Internet access. With this information, we can provide data to our customers to facilitate any assessment regarding compliance to the RoHS directive and lead-free status. WeEn Semiconductors has set a standard in the semiconductor business with this detailed level of data, directly retrieved from its general product database. WeEn Semiconductors products are compliant to the EU Directives RoHS, ELV and the China RoHS.
Disclaimer
All information in this document is furnished for exploratory or indicative purposes only. All information in this document is believed to be accurate and reliable. However, WeEn Semiconductors does not give any representations or warranties as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. WeEn Semiconductors may make changes to information published in this document at any time and without notice. Minor deviations may occur in the products from different manufacturing location. This document supersedes and replaces all information supplied prior to the publication hereof. Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.
